top of page

Long Boards in Wide Plank Floors: Why Plank Length Matters

12 minutes ago
6 min read

Plank length decides how many board ends you see across a room, and longer boards mean fewer joints, longer runs of unbroken grain and a floor that feels calm and generous in a large space. Every species we make includes long boards in the mix, and they are a big part of why a handcrafted wide plank floor looks so different from a mass-produced one.

Width tends to get most of the attention when people plan a wood floor, but length does just as much work, especially in the great rooms, long halls and open living spaces of a custom home. This guide explains what plank length changes, how the lengths compare across our species, where long boards come from and how to lay them so they show at their best.


What Does Plank Length Change in a Room?

Every board has two ends, and every end makes a short line across the grain. How many of those lines you see, and how they are spread across the floor, has a strong effect on how the room feels.

Fewer Joints, Longer Grain

Short boards put a lot of end joints into a floor, and the eye reads them as a busy, broken pattern. Long boards let the grain run uninterrupted for several feet at a time, so you see the character of each plank instead of the seams between them. On a live sawn floor, with its natural mix of rift, quarter and plain sawn grain, those long runs give the figure room to play out.

Scale in Large Rooms

A large room needs a floor with enough scale to match it. In a great room or an open kitchen and living space, long boards stretch the eye along the room and make the space feel settled rather than cut up. For more on planning a single floor through connected spaces, see our post on wood flooring for an open concept floor plan.

Length and Width Together

Length and width are best chosen as a pair. A wide board that is also long keeps its proportions, while a wide board cut short can start to look stubby across a big floor. When you plan a wide plank floor for a large home, ask about both dimensions at the same time.


Plank Lengths by Species

Each of our species comes in a natural mix of board lengths within a set range, which keeps the floor from ever looking repetitive. The average length tells you what a typical board looks like, while the top of the range tells you how long the longest boards in your floor can be.

Northern White Oak

Our Northern White Oak wide plank flooring runs in random lengths from 2.5 to 12 feet, with an average of 7 feet. That spread gives installers plenty of short and mid-length boards for stagger, along with long boards that carry the grain across the room. It is our number one seller and suits nearly every room in a large home.

French Oak

French Oak has the longest average of our three species. Our French Oak wide plank flooring runs from 3 to 13 feet with an average of 10 feet, which means most boards in the floor are long ones. Paired with French Oak's extra-wide boards, that length gives a grand, unhurried look suited to the largest rooms.

Southern Pecan

Southern Pecan runs in random lengths from 2.5 to 10 feet, with an average of 7 feet. Pecan's strong color variation, from cream sapwood to darker heartwood, means the eye follows color as much as joints. A slightly shorter maximum length reads naturally in a pecan floor because each board already carries so much movement of its own.

Natural Face Random Long Lengths

Our signature Natural Face wide plank flooring is available in random long lengths up to 12 feet. Natural Face is hand sanded and hand shaped to preserve the undulations, saw marks and natural character of the surface, so a long board carries that hand-worked surface over a much greater distance. The effect recalls the floors of centuries-old chateaus, where long boards and an aged surface go hand in hand.


Why Long Boards Come From Bigger, Older Trees

A long, sound board can only come from a long, straight section of trunk. Larger, older trees have more usable length between the base and the first major branches, which is why they yield the long boards that a wide plank floor depends on. Younger, smaller trees tend to give shorter pieces.

Our French Oak lumber comes from French forest trees that are 150 years old or more. That age is part of what makes long, wide French Oak boards possible, and it shows in the settled character of the grain.

A long board also tells more of the tree's story. Over several feet of plank you can watch the grain shift and tighten, pass around a knot and open up again, which is exactly the kind of natural character we want the floor to show. Cut that same wood into short pieces and much of the story is lost at the joints.

Closer to home, most of our raw material comes from dead standing timber or from trees cleared for development or agriculture, gathered from small rural towns across Texas and the United States. Because we saw our own lumber at our facility in Bryan, Texas, before shipping floors to homes across the United States, the length of those boards starts with how each log is opened up on our own sawmill. From there, each board is cured, dried and milled, then sanded and finished by hand, the way we have made wide plank floors since 1998.


Laying Long Boards: Stagger and Layout

Long boards only show their full value when they are laid with care. These are points to discuss with your installer and designer before work begins, since the layout decisions are made on site.

Spreading the End Joints

Good installers stagger the end joints so that joints in neighboring rows never line up close together. That avoids the repeating ladder and stair-step patterns that make a floor look manufactured. Installers usually lay out boards from several bundles at once, mixing lengths so the long boards are spread through the room rather than grouped in one corner.

Running Boards With the Room

Long boards show off their length best when they run along the longest dimension of the room or along the main sightline from an entry. Your architect or designer can mark the board direction on the plans, which helps keep the floor consistent from one room to the next. In a long hallway, boards that follow the length of the hall make it feel deliberate and generous, while boards laid across it stack up joint after joint.

Planning for Delivery and Handling

The longest boards need room to be carried into the house and stacked flat. Check with your builder that doorways, stairs and turns in the plan allow long bundles to reach each floor, and keep the flooring indoors in the conditions set out in our install guide. On a large project, it can also help to set aside the longest boards for the rooms people see first.


Frequently Asked Questions

Do long boards move more than short boards?

Not in a way you will notice along their length. Wood expands and contracts mainly across its width as moisture levels change, and moves very little along the grain. That is why proper site conditions and expansion space matter far more than board length for seasonal movement.

Will a long-length floor still include short boards?

Yes. Random lengths are a natural mix, and the shorter boards play an important role in giving the installer options for stagger at the ends of rows and around doorways. In the finished floor, the long boards set the character of the room while the shorter ones help the layout fall into place.

Does plank length matter on a wood ceiling?

It does, and for the same reasons. Our wood ceilings run up to 12 feet long in Northern White Oak and French Oak and up to 10 feet in Southern Pecan, so long, clean runs between beams or across a flat ceiling are possible. Matching ceiling boards to the floor below helps a room feel planned from top to bottom.


Plan a Floor With Room to Breathe

If you are planning a custom home or whole-home renovation with large rooms, plank length is worth deciding early, alongside species and width. Talk to our team about the lengths available for your floor and how to make the most of them across the house.


Thanks for subscribing!

bottom of page