Ordering Wide Plank Flooring for a Custom Home: Measuring and Overage
To work out how much flooring you need for a custom home, measure the square footage of every space that will receive the floor, add the stairs and landings, and then add an overage that reflects the widths, lengths and layout you have chosen. The aim is one complete order for the whole house, so every board comes from the same production run.
A made-to-order wide plank floor is planned differently from flooring bought off a shelf. Getting the quantity right at the start protects the color and character of the floor, and it keeps the build moving once the installer is ready to begin.
Why One Complete Order Matters
Every floor we make is handcrafted and finished by hand, board by board, at our facility in Bryan, Texas, and shipped to custom homes across the United States. We saw the lumber, cure and dry it and mill the profile, then sand, scrape and finish in the same location, and our custom color blends are developed and hand-applied in-house. That handwork is what gives the floor its depth, and it is also the reason a whole house should be made together.
Color and Character Stay Consistent
Wood is a natural material, and no two trees are alike. When the boards for every room are milled and finished in a single run, the color blend and the variation from board to board read as one floor, from the entry all the way to the primary suite.
A small add-on order placed months later, on the other hand, is a separate batch of wood with a separate hand-applied finish. It can still be beautiful, but it will never be as close a match as boards that were made side by side.
Made to Order Means There Is No Shelf to Pull From
Our floors are custom and made to order, and we manufacture a limited quantity each month. If a project comes up short, the extra boards have to be made rather than picked from a warehouse, which can leave an installer waiting at the worst possible moment. Ordering the full quantity once, with sensible overage, closes that gap before it opens.
How to Measure a Whole Home for Wide Plank Flooring
On a custom build, the first figure usually comes from the architectural plans and is then confirmed on site once the walls are framed. Your architect, builder and installer will all have a view, so it helps to agree early on who will check the final number before it goes onto the proposal.
Start With Every Room, Closet and Hallway
Measure each space as a rectangle, length times width, and break L-shaped or irregular rooms into smaller rectangles before adding them together. Be sure to include closets, pantries and hallways, along with any area where the floor will run beneath built-in furniture.
Keep the measurements as a room-by-room list rather than a single total. A list is easy to check against revised drawings, and it shows at a glance where the largest and most visible rooms are, which matters later when the installer plans where the best boards will go.
Mark Where the Floor Changes Direction
In a large home, the boards may run one way through the main living areas and then turn where a hallway meets a bedroom wing. Each change of direction creates extra cuts along the transition, so mark those points on the plan and make them part of the conversation about overage from the start.
Count the Stairs and Landings in the Same Order
Stairs are easy to leave out of a flooring takeoff, yet they often sit at the center of the home where everyone sees them. We make custom stair treads, risers and nosings matched to each of our species and made from the same raw materials as the flooring, so they can be ordered right alongside the floor.
Count every tread and riser, note which steps have open ends, and measure the landings as floor area. Listing them with the room measurements keeps the stair from becoming a separate order that arrives from a different run.
Planning Overage for Wide Plank Floors
Overage is the extra material ordered on top of the measured square footage. It covers boards cut away at walls and doorways, end pieces too short to use, and boards the installer sets aside while arranging color and character across a room. Because the right amount depends on the product and the layout, settle it with your installer before the order is placed.
Random Widths and Lengths
Our Northern White Oak and Southern Pecan floors are offered in random widths and random lengths, and the balance of widths across the house shapes the finished look. Installers typically sort bundles by width before they start and plan the square footage of each width, so the mix holds steady from room to room.
Our random width installation tips explain how to lay the widths so the floor never runs short of one size halfway through the house. Long boards reduce the number of end joints, but every run along a wall still finishes with an offcut, and that is part of what the overage allows for.
Room to Place the Best Boards
All of our wide plank flooring is live sawn, which produces a natural mix of rift, quarter and plain sawn grain across the floor. Installers who care about the finished room will lay the most striking boards in the great room and along the main sightlines, then balance the character of the boards across every other room.
That kind of selection is only possible when there are boards to choose from. A little extra material is what lets an installer make thoughtful decisions on every row, instead of laying whatever comes next out of the box.
Patterns and Angled Layouts
A straight lay uses material most efficiently. Diagonal and patterned layouts involve angled cuts at every wall, doorway and transition, so they call for more overage than a straight lay of the same room. If a pattern is under consideration anywhere in the house, decide on it before the takeoff so the quantity reflects it.
Delivery, Storage and Acclimation on Site
Plan the delivery around the readiness of the build. Our hardwood flooring install guide follows NWFA guidelines and asks for the building to be closed in, the subfloor dry, and the site held at 60 to 80°F and 40 to 60 percent humidity for 14 days before, during and after installation.
Flooring that arrives before those conditions are in place has to wait somewhere, and an open shell or a damp garage is the wrong place for handcrafted wood. Agree on a delivery window with your builder once the HVAC is running and the wet trades have finished, and keep the boxes inside the home where the floor will live.
Once the boards are inside, they need time to adjust to the house before they go down. We cover that step in our guide to acclimating wide plank hardwood flooring, so your builder and installer can build it into the schedule.
Frequently Asked Questions
Should I order flooring for every phase of the property at once?
Wherever the plans allow, yes. If a guest house, studio or later wing will share the same floor, including it in the original order keeps the color and character consistent across buildings. If a phase is still uncertain, raise it with us early so the decision is made with every building in view.
Who should confirm the final quantity?
The builder and homeowner are responsible for confirming the flooring quantities, along with the stair treads, risers and nosings, on the proposal. Because the made-to-order product is made from the quantities listed on the proposal, please review it closely and confirm your measurements. The installer who will lay the floor is usually best placed to check the figures, because the overage depends on how they plan the layout and where they start. The architect's drawings give the starting figure, and a site measurement after framing catches any walls or openings that moved during the build.
Does the texture I choose change how much flooring I need?
The measured square footage is the same for every texture; what changes is the time spent arranging boards during layout. With Natural Face, knots, cracks and grain variation are part of the look, and installers often take extra care balancing them across a room, so a comfortable overage gives them the freedom to place each board well.
Plan the Whole Home in One Order
A floor ordered once, for the entire house, is the most reliable way to make every room feel as though it belongs to the same home. When your plans are ready, contact our team to talk through the species, texture and finish of your floor and the stairs that go with it, and bring your architect or designer into the conversation from the start.



